Hydrostatic Release Units

Categories

 
Showing: 1-9 of 9
  • $149.00
    Description Patented rod system allows release of the beacon from a Category I bracket when submerged in water between 1.5 – 4 meters (4.9 – 13.1 feet).  Designed to work with Sea Shelter™, Sea Shelter™2 and Sea Shelter™3 brackets A patented rod system does not rely on a battery, blade or pyrotec...
  • $149.00
    Description MCMURDO EPIRB HRUBREAKTHRU The McMurdo HRU (Hydrostatic Release Unit) is the water pressure activated automatic release mechanism for McMurdo EPIRBs.The HRU is a sealed unit and requires replacement every 2 years. The HRU Replacement Kit contains all of the necessary parts to both rep...
  • $10.00
    Description Hammar Standard Bolt with Nut and Washer Bolt Standard, 90 mmItem Number:HA2010H Bolt Standard, 90 mm, incl. 2 washers5.5 mm hole.  Additional Information Weight 2 lbs Dimensions 6 × 6 × 4 in
  • $149.00
    Description Hammar H20E HRU for EPIRB – USCG/SOLAS/MED The Hammar H20E is activated by water pressure which will automatically release the EPIRB. Instead of the rope sling a specially developed plastic bolt secures the EPIRB, which will be cut when the HRU is activated.Release depth: 1.5-4.0 met...
  • $149.00
    Description Replacement Hydrostatic Release mechanism for Ocean Signal Cat I Epirbs. Must be replaced every two years from date of installation. ONLY this model will fit Ocean Signal Type I housings. Additional Information Weight 2 lbs Dimensions 6 × 6 × 4 in Approvals Material Decl...
  • $149.00
    Description HRU Kit JOTRON FB60/FB40/FBH Additional Information Weight 2 lbs Dimensions 6 × 6 × 4 in
  • $149.00
    Description Hammar Hydrostatic Release Unit for EPIRB’s In an emergency situation the automatically activation of the EPIRB will dramatically facilitate the rescue operation and the possibility to save lives. The Hammar H20 is the most reliable hydrostatic release unit on the market and is used ...
  • $149.00
    Description H20R Hydrostatic Release Unit for liferafts – USCG/SOLAS/MED The Hammar H20 is a hydrostatic release unit designed to fit liferafts of all shapes and sizes. It is made of glass fiber reinforced nylon, which prevents it from corroding. The Hammar H20 needs no annual service, maintenanc...
  • $149.00
    Description H20R  for small inflatable life rafts The H20 Small Raft model (green label) is used for USCG approved liferafts < 6 persons and all recreational rafts up to 12 persons. The weak link system has a breaking strength of 1,2 +- 0,4kN. USCG approval no 160.062/14/10. The Hammar H20 for...