Parts of a Ship Explained with Names and Functions

The main parts of a ship include the hull, bow, stern, decks, bridge, engine room, propeller and rudder. The hull forms the vessel’s body, the bow is the front, the stern is the rear, and the bridge is the main navigation and control station.

Ships also contain structural supports, cargo spaces, tanks, anchoring equipment and crew accommodation. Their layout varies by vessel type. A tanker carries liquid cargo in tanks, while a bulk carrier typically has holds beneath large hatch covers.

To go deeper into ship design and structure, see Ship Knowledge: Ship Design, Construction & Operation (11th Edition) and Ship Construction (7th Edition).

Use the diagram and quick reference below to identify the main areas before looking at each system in more detail.

 

Illustrative cargo ship layout, not to scale. The bow faces right in both views. Machinery positions and deck arrangements vary between ships. Diagram labels identify typical features rather than equipment found on every vessel.

Main ship parts at a glance

Part

Typical location

Main function

Hull

Main body

Provides buoyancy and structural enclosure.

Bow

Forward end

Shapes the ship’s entry through water.

Stern

After end

Forms the rear of the vessel.

Keel

Bottom centerline

Contributes to the bottom structure’s strength.

Deck

Horizontal levels

Provides working surfaces and structural support.

Bulkhead

Internal divisions

Separates compartments; some form watertight or fire boundaries.

Bridge

Elevated control area

Supports navigation, lookout and ship control.

Engine room

Machinery space

Houses propulsion and supporting machinery as arranged.

Propeller

Usually submerged aft

Generates thrust.

Rudder

Usually aft

Produces steering force as water flows past it.

Cargo hold or tank

Cargo spaces

Carries dry or liquid cargo.

Ballast tank

Within the hull

Holds water used to manage loading condition.

Anchor and windlass

Commonly forward

Provide anchoring and chain handling.

Accommodation

Crew living areas

Provides cabins and daily living spaces.

In this guide

  • Ship directions and measurements

  • Hull and internal structure

  • Decks and superstructure

  • Navigation and control areas

  • Propulsion and steering

  • Cargo spaces and tanks

  • Anchoring and mooring equipment

  • Crew accommodation and safety equipment

  • How ship layouts differ

  • Frequently asked questions

Ship directions and measurements

Bow stern port and starboard

The bow is the front of the ship and the stern is the rear. Forward means toward the bow; aft means toward the stern. Amidships refers to the middle region, with the exact meaning depending on context.

Port is the left side when facing the bow, and starboard is the right side. Those names stay fixed to the ship even when you turn around. A person facing aft has the port side on their right.

The port bow and starboard bow identify the forward side regions. The quarters are the corresponding regions near the stern. Abeam describes a direction approximately at right angles to the ship’s centerline.

Beam draft waterline and freeboard

The centerline is an imaginary reference running lengthwise through the middle of the vessel. Beam usually means the ship’s width; a quoted dimension should specify the measurement convention when precision matters.

Draft, also spelled draught, is the vertical distance from the waterline to the relevant lowest point of the hull or keel. Forward and aft drafts may differ. Trim describes the difference between the forward and aft drafts.

The waterline is where the water surface meets the hull. Freeboard is a vertical distance above that waterline; assigned regulatory freeboard uses specified reference points, including the deck line. Load line marks indicate permitted loading limits under the applicable conditions. See the Load Lines Convention guide for related terminology.

Hull and internal structure

Hull and shell plating

The hull is the ship’s main body and extends above and below the waterline. Its shape and enclosed volume allow the ship to displace water and float. Shell plating forms the outer skin of many commercial ships; frames and other internal members support it.

Keel frames and longitudinal members

The keel runs along the bottom centerline and forms part of the vessel’s structural framework. Frames support the hull transversely, while longitudinal members run lengthwise. Decks, plating and internal supports work together to resist loads from cargo, machinery and waves.

A large ship’s structural keel should not be confused with a sailing yacht’s projecting fin keel. The yacht’s keel can provide ballast and resist sideways motion; those functions do not describe every merchant ship keel.

Bulkheads and double bottom

Bulkheads are upright partitions that divide the interior. Some are watertight boundaries, some provide fire separation, and others serve structural or general partitioning purposes. A bulkhead is not automatically watertight simply because it separates two spaces.

A double bottom has an inner bottom above the outer bottom shell, with spaces between them. It contributes to structure and can provide tank or void spaces. Its protection against damage depends on the design and the extent of any grounding or collision.

Bilges

Bilge areas and wells collect drainage in low parts of machinery or other spaces. Pumps move collected liquids through the appropriate handling system. Oily bilge water requires controlled treatment and disposal; collection in a bilge does not make it suitable for unrestricted discharge.

Decks and superstructure

Decks divide the ship into horizontal levels and support equipment, cargo and people. An exposed weather deck is open to the elements. The main deck is a designated principal deck; the term does not always mean the highest exposed surface.

A forecastle is a raised forward structure or deck area, often associated with anchoring equipment. A poop is a raised after structure or deck. Their presence and extent vary between designs.

In everyday descriptions, superstructure refers to enclosed structures above the main hull. Technical rules distinguish a superstructure from a deckhouse using specific criteria, including breadth and position. Those structures may contain the bridge and accommodation.

Bulwarks are solid barriers along deck edges, while guardrails provide more open protection. Scuppers drain deck water through arranged outlets. Freeing ports are openings in bulwarks that help release water accumulated on exposed decks.

Navigation and control areas

The bridge is the main station for navigating and controlling the ship. Bridge personnel monitor traffic, maintain lookout, plan and follow the voyage, and communicate with other vessels and shore services.

Steering controls and propulsion commands may be operated from the bridge, but the propulsion engine itself is housed elsewhere. Instruments can include radar, electronic chart systems, compasses, positioning receivers and communications equipment. Our guide to navigation equipment used on modern ships explains their roles.

Bridge wings extend to the sides and help personnel observe the ship’s side during maneuvering. The open area above the bridge is often called the monkey island. It may carry a magnetic compass or other equipment, depending on the design.

Masts support equipment such as lights, aerials and signal halyards. A funnel provides an exhaust outlet for machinery. Neither its shape nor the presence of emissions treatment equipment is identical across all vessels.

Propulsion and steering

Engine room and propulsion machinery

The engine room houses major machinery and supporting systems. Depending on the vessel, it can include main engines, generators, pumps, compressors, cooling systems and fuel treatment equipment. Its location and machinery arrangement vary; some propulsion systems use electric motors and distributed machinery spaces.

Propeller and rudder

A conventional propeller rotates to accelerate water and produce thrust. A shaft line can transmit power from an engine or motor, while other arrangements use propulsion pods or different drive systems.

A conventional rudder changes the direction of water flow to create a steering force. Steering gear moves the rudder in response to control commands. Steering backup arrangements are not necessarily a second rudder; the arrangement depends on the vessel.

Thrusters

Bow or stern thrusters generate transverse thrust to assist maneuvering. Some ships use azimuthing units that can turn their thrust direction. Thruster capability is affected by conditions and operating limits, so their presence does not remove the need for tugs in every situation.

Cargo spaces and tanks

Cargo holds are spaces used for dry cargo. Hatches are access openings, and hatch covers close those openings. Many exposed cargo hatch covers are designed to be weathertight; watertightness is a different requirement, and the specified standard depends on the opening and vessel arrangement.

Tankers carry liquid cargo in dedicated tanks with associated piping and handling equipment. Container ships use securing arrangements for containers carried in holds and on deck. Shipboard cranes are fitted on some vessels, while others depend on shore equipment.

Ballast tanks hold water used to manage draft, trim, stability and structural loading within an approved operating condition. Fuel tanks, often called bunker tanks, store fuel; fresh water tanks store water for domestic or other shipboard use. Tank contents and functions must not be treated as interchangeable.

Anchoring and mooring equipment

An anchor connects to the ship through a chain or other designed cable arrangement. The windlass handles the anchor chain, and the chain locker stores it. Hawse pipes guide the chain through the hull near the anchor position.

Mooring lines secure a ship to a berth. Winches handle and tension lines, bitts or bollards provide securing points, and fairleads guide the lines. Mooring and anchoring are distinct operations with different equipment and load paths.

Crew accommodation and safety equipment

Accommodation includes crew cabins, sanitary spaces and shared living areas. The galley is the kitchen, and mess rooms provide dining space. Their size, location and arrangement depend on the vessel and crew complement.

Lifeboats, liferafts and rescue boats serve different emergency functions. Muster stations are designated assembly points. The ship’s plans and onboard instructions identify the actual locations and routes; an introductory diagram cannot replace those arrangements.

For structured study of vessel terminology and operations, browse our USCG exam study materials.

How ship layouts differ

Vessel type

Typical layout distinction

Bulk carrier

Large holds and hatch openings for unpackaged dry cargo.

Container ship

Container stowage in holds and on deck, with securing arrangements.

Tanker

Dedicated liquid cargo tanks and cargo piping systems.

Ro ro ship or ferry

Vehicle decks and access ramps.

Passenger ship

Extensive passenger accommodation and public spaces.

Sailing vessel

Masts and rigging provide a sail propulsion arrangement.

A shared vocabulary helps you read a ship diagram, but identifying a feature requires attention to the vessel type. A bulbous bow, deck crane, tunnel thruster or raised poop deck is not present on every ship.

American Nautical Services provides maritime publications, nautical instruments and study resources for mariners. Use a vessel’s general arrangement plan alongside reference publications when learning its specific layout.

Frequently asked questions

What are the main parts of a ship

Common parts include the hull, bow, stern, decks, bridge, engine room, propeller and rudder. Ships also have cargo or passenger spaces, tanks, anchoring equipment and crew areas. The exact arrangement depends on the vessel.

What is the front and back of a ship called

The front is the bow and the rear is the stern. Forward means toward the bow, while aft means toward the stern. Aft can describe a direction or location and is not limited to interior spaces.

Which side is port and which is starboard

The port is the left side and starboard is the right side when facing the bow. The names remain fixed to the vessel regardless of where a person stands or looks.

What is the difference between the hull and the deck

The hull is the vessel’s main body. A deck is a horizontal structural level that provides a surface or divides spaces. A ship can have several decks within and above its hull.

What is the difference between a bridge and a wheelhouse

Wheelhouse usually refers to an enclosed steering and navigation space. Bridge can refer more broadly to the navigation and control area, including associated wings. Usage varies with vessel type.

Do all ships have the same parts

Many share a hull, decks and control areas, but propulsion, cargo equipment and accommodation differ. Tankers use cargo tanks, ferries need vehicle access arrangements, and sailing vessels carry masts and rigging.